1995 Volvo 854 T5-R modified a bit over the last three years
1995 Volvo 854 T5-R
Ap 325 mm front big brake kit, with Carbotech XP8 Pads
Volvo V70R 330 mm Rear discs and R Calipers with Ferodo DS 2500 pads
KW Race two way adjustable Coilover kit with adjustable bump and rebound and camber adjustment, corner weighted
18 inch OE Volvo silver Pegasus alloys wheels
Tyres 225/40/18 Dunlop Do3J?s with road legal Cut slicks
Autronic stand alone SM4 ECU with complete wiring loom standard features Anti lag/full launch control/traction control
Autronic 500R CDI unit with 5 individual coils (Volvo 960/V90) new custom loom for unit to coils designed and made for us.
Walbro 255 in tank pump firing into Bosch 044 fuel pump and custom fuel filter
Siemens 830 cc fuel injectors
Volvo engine bay wiring all removed from engine bay and all other wiring hidden where ever possible
AIM Digital dash display covering all sensors for oil temp/water temp/oil pressure/exhaust gas temp/boost pressure/speed/tacho/gear number in a custom carbon fibre surround
Front fogs removed and brake ducts added
854 R rear spoiler (with the extra lip)
Built by RT Mechanics sticker
Complete strip and re paint of underside of car with Primrose yellow coloured underseal
Complete strip and re paint of bodywork antenna hole removed and any brackets removed fully repainted inside and out in primrose yellow paint.
All parts cleaned and repainted or Powdercoated to match
RT Custom Intercooler with three inch custom alloy pipe work .
RT Custom front panel modified and re strengthened
RT Custom modified re Strengthened bulkhead made to fit new pedal box design/steering column
RT Pedal box and brake bias valve
Large Girling design of brake fluid reservoirs
Momo Steering wheel 330mm
Complete Braided brake lines front to back
Aeroquipt hoses on all fuel and water lines
RT Spec Custom engine re build
Brand new RT Polished / ported and flowed 3 angle cut valve seats with RT Custom uprated valve springs, Head modified to suit new springs/inlet manifold flowed to suit throttle body.
76mm 960/V90 throttle body/ RT Custom design high strength Engine block liners/modified machined block.
RT High spec/high quality Conrod?s with uprated gudgen pins
RT High spec Pistons with high grade rings to our own design and all engine parts Cams/flywheel/pulleys/crankshaft/ pistons and rods were all dynamically balanced .
RT Custom out of billet cams designed by us.
Custom tubular exhaust manifold and 3.5 inch exhaust made in stainless steel re packable silencer for noise reg?s etc
Ceramic coating to manifold and downpipe sections and rest of system heat wrapped
Garrett GT35R Turbo running 2.5 bar
Tial 44mm external Wastegate with Autronic boost controller
K&N large cone filter
Spec R breather system with all new collector using Aeroquipt hoses and connectors
Spec R Group A dump valve
Volvo bonnet catch?s removed and locking Aero catch bonnet fasteners added .
ARP nuts and studs for all manifold and turbo connections
RT design heat shield around master cylinder area/transmission tunnel sections
RT Bonnet grille with Volvo flash
Interior completely stripped of all plastics (apart from dash), any excess wiring, carpets, rear window motors door cards, rear Volvo seats removed ,dash modified and replaced with a non wood effect look, carbon fibre inserts in dash, wiring hidden from view where ever possible ,sunroof cassette removed and replacement roof skin fitted over original.
Carbon fibre switch panel for heater/anti lag/traction control/ launch control
D2 front lightweight seats
Custom seat frames and runners
Willans 3 inch four point harness kit
Poly wishbone arm bushes/ Yellow Top engine mount bush/Powerflex custom made yellow poly bush bulkhead mount bush/lower torque arm mount poly bushes
Custom RT front straight strut brace
Custom RT rear strut brace incorporating harness attachment?s
Ipd Anti roll bar kit front/rear,
Adjustable Anti roll bar end links
Full Custom Roll cage with windscreen pillar supports
Modified design of steering support?s
RT designed upper side engine stabiliser mount with Strut brace fixing points
RT Custom made alloy subframe bushes
Carbon fibre boot trim cover,
Carbon fibre with yellow weave spark plug cover, and throttle body cover,
Carbon fibre front lip spoiler
Battery relocated to boot area with all new high gauge wire used through out
Aquamist Water injection kit with two jets controlled by the SM4
Water injection 2 litre tank with level sensor light
Modified M56 Gearbox with gripper plate diff with high ramp angle
Helix full paddle cluch kit